Keith Rucker - VintageMachinery.org
Keith Rucker - VintageMachinery.org · 303 個帶字幕的影片Keith Rucker - VintageMachinery.org 在 WinkLingo 收錄了 303 個影片(這個頻道有 27萬 個訂閱),每個影片都能逐字檢索。
查看 YouTube 原頻道英文簡介
This is my channel where I shoot video of some of my favorite things. I enjoy working on and restoring all kinds of vintage machinery - from woodworking machines, metal working machines, old farm equipment, steam engines, and steam locomotives. I spend a lot of my spare time volunteering at the Georgia Museum of Agriculture where I help to restore and keep their machinery up and running.
收錄的影片
23:06澆鑄巴位元合金軸承:水平與垂直澆鑄
Pouring Babbitt Bearings: Horizontal and Vertical Pours
28:16Monarch 車床小盤:通過過載斷續切削測試小盤
Monarch Lathe Compound: Testing the Compound With Some Heavy Interuperted Cuts
26:06Vulcan 蒸汽機車維修:用雷射清洗機清除舊鏽跡、油汙和油漆!
Vulcan Steam Locomotive Repairs: Cleaning up old Rust, Oil, and Paint with the Laser Cleaner!
15:49Vulcan 蒸汽機車維修:安裝新蒸汽幹管及基礎工作
Vulcan Steam Locomotive Repairs: New Steam Dry Pipe Installed and Grunt Work....
27:25Monarch 車床複合休整:更換曲柄手柄並製作新的 T 型螺母
Monarch Lathe Compound: Replacing the Crank Handle and Making a New T-Nut
32:55Vulcan 蒸汽機車維修:檢查蒸汽幹管是否洩漏
Vulcan Steam Locomotive Repairs: Checking the Steam Dry Pipe for Leaks
27:09Odds & Ends 164:刮削課程、觀眾來信、Big Boy 4014
Odds & Ends 164: Scraping Class, Viewer Mail, Big Boy 4014
35:27新機器到貨:1500W 雷射清洗機!
New Machine Day: 1500W Laser Cleaning Machine!
21:13Vulcan 蒸汽機車維修:製作新的十字頭腕銷螺母
Vulcan Steam Locomotive Repair: Making New Cross Head Wrist Pin Nuts
32:11Monarch 車床十字滑臺和複合頂升塊:最後收尾!
Monarch Lathe Cross Slide And Compund Riser Block: Finishing it Up!
33:23Vulcan 蒸汽機車維修:將鍋爐拆至裸機以進行超音波檢測與修復
Vulcan Steam Locomotive Repair: Stripping it Down to the Bare Boiler for Ultrasound & Repairs
45:28緊急搶單:在 Windy Hill Foundry 為 Clarke Easterling 製作新齒輪
An Emergency Rush Job: Making a New Gear for Clarke Easterling at Windy Hill Foundry
32:12Vulcan 蒸汽機車維修:最終組裝並進行試執行!
Vulcan Steam Locomotive Repairs: Final Assembly and Taking Her for a Test Run!
34:18Vulcan 蒸汽機車維修:安裝新氣缸套並開始重新組裝
Vulcan Steam Locomotive Repair: Installing New Cylinder Sleeves & Beginning Reassembly
36:03蒸汽斯托克發動機:最終組裝與完工!
Steam Stoker Engine: Final Assembly and Finishing it up!
39:03為我的 Monarch 28英寸車床加工一個底座鑄件
Machining a Riser Block Casting for my Monarch 28” Lathe
35:49Vulcan蒸汽機車維修:連桿錐形螺栓的加工與安裝
Vulcan Steam Locomotive Repair: Machining and InstallingTapered Bolts for the Connecting Rods
33:32Vulcan蒸汽機車維修:連桿的配合、墊片安裝與組裝
Vulcan Steam Locomotive Repair: Fitting, Shimming and Assembly of the Connecting Rods
33:24Vulcan蒸汽機車:青銅連桿軸承的錐面銑削與鏜孔
Vulcan Steam Locomotive: Milling a Taper and Boring the Bearing on Bronze Connecting Rod Bearings
32:17Vulcan 蒸汽機車維修:銑削大型青銅連桿軸承
Vulcan Steam Locomotive Repair: Milling the Large Bronze Connecting Rod Bearings
32:20Vulcan 蒸汽機車維修:使用 K&T 2D 銑床在連桿青銅軸承上銑削圓弧
Vulcan Steam Locomotive Repair: Milling an Arc using a K&T 2D Mill on Connecting Rod Bronze Bearings
34:56Vulcan蒸汽機車維修:製作可調節的連桿軸承楔塊
Vulcan Steam Locomotive Repairs: Making Adjustable Connecting Rod Bearing Wedges
30:15Vulcan 蒸汽機車維修 - 製作新的主連桿前青銅軸承
Vulcan Steam Locomotive Repairs - Making New Main Rod Front Bronze Bearings
24:41Vulcan 蒸汽機車維修 - 環形切口加工與十字頭連線活塞桿
Vulcan Steam Locomotive Repairs - Notching the Rings & Attaching the Cross Head to Piston Rods